Equator q series User's Guide download pdf (Page 18)

Equator Room Analysis User Guide v2.0

Using Equator Room Analysis Software Continued

Audio Configuration

The software addresses issues created by speaker placement, boundary conditions, and

secondary reflections by examining the chosen position with the calibrated microphone. It

then automatically feeds each speaker’s internal CPU the acquired data, which then, in turn,

compensates the Digitally Controlled Transducers™ adjusting for any and all sonic

anomalies that might exist at that position.

Placing the Microphone

Select an area in the room to be analyzed. A good first choice is the engineer’s mix

position. Place the supplied measurement microphone vertically at ear level where the

engineer would sit.

Multiple locations can be measured, compensated, titled, stored, and recalled so the

engineer can monitor properly at the mix position, the producer can hear it accurately at his

desk, and the band can listen from the control room couch by recalling the appropriate RMC

file (explained later).

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

No comments

Equator q series User's Guide Page 18